It is possible to localize the dialog strings using some internal properties as shown in the samples and picture below. The DrawingUnitsDialogLengthTypes array contains the 6 length unit types, in this order: Architectural, Decimal, Engineering, Fractional, Scientific, Windows desktop. The DrawingUnitsDialogAngleTypes array contains the 5 angle unit types, in this order: Decimal degrees, Degrees/Minutes/Seconds, Gradians, Radians, Surveyor's units.

Copy

[C#]
dxfReaderNETControl1.DrawingUnitsDialogText = "图形单位";
dxfReaderNETControl1.DrawingUnitsDialogButtoOkText = "好";
dxfReaderNETControl1.DrawingUnitsDialogButtonCancelText = "取消";
dxfReaderNETControl1.DrawingUnitsDialogLengthText = "长度";
dxfReaderNETControl1.DrawingUnitsDialogAngleText = "角度";
dxfReaderNETControl1.DrawingUnitsDialogTypeText = "类型";
dxfReaderNETControl1.DrawingUnitsDialogPrecisionText = "精度";
dxfReaderNETControl1.DrawingUnitsDialogLengthTypes = new string[6] { "建筑", "小数", "工程", "分数", "科学", "Windows 桌面" };
dxfReaderNETControl1.DrawingUnitsDialogAngleTypes = new string[5] { "十进制度", "度/分/秒", "百分度", "弧度", "勘测单位" };

dxfReaderNETControl1.ShowDrawingUnits();

Copy

[Visual Basic]
With DxfReaderNETControl1
   .DrawingUnitsDialogText = "图形单位"
   .DrawingUnitsDialogButtoOkText = "好"
   .DrawingUnitsDialogButtonCancelText = "取消"
   .DrawingUnitsDialogLengthText = "长度"
   .DrawingUnitsDialogAngleText = "角度"
   .DrawingUnitsDialogTypeText = "类型"
   .DrawingUnitsDialogPrecisionText = "精度"
   .DrawingUnitsDialogLengthTypes = New String() {"建筑", "小数", "工程", "分数", "科学", "Windows 桌面"}
   .DrawingUnitsDialogAngleTypes = New String() {"十进制度", "度/分/秒", "百分度", "弧度", "勘测单位"}

   .ShowDrawingUnits()
End With

Reference

DXFReaderNETControl Class

DXFReaderNET Namespace

DXFReaderNETControlAddLanguageSpecificTextSet("LSTC15EF4D9_0?cpp=::|nu=.");ShowDrawingUnits Method

Reference

DXFReaderNETControlShowDrawingUnits Method