ArcLengthDimension Properties

Gets the angle of the measured arc in degrees.

Gets the location of the dimension line arc.

Gets or sets the dimension text attachment point.

Gets the block that contains the entities that make up the dimension picture.

Gets or sets the center point of the arc in OCS (object coordinate system).

Gets the dxf entity type string.

Gets or sets the entity color.

Gets the dimension type.

Gets or sets the dimension elevation, its position along its normal.

Gets or sets the arc end angle in degrees.

Gets the handle assigned to the dxf object.

Gets or set the entity visibility.

Gets or sets the entity layer.

Gets or sets the dimension text line spacing factor.

Get or sets the dimension text line spacing style.

Gets or sets the entity line type.

Gets or sets the entity line type scale.

Gets or sets the entity line weight, one unit is always 1/100 mm (default = ByLayer). Valid value are: 0, 5, 9, 13, 15, 18, 20, 25, 30, 35, 40, 50, 53, 60, 70, 80, 90, 100, 106, 120, 140, 158, 200, and 211.

Actual measurement.

Gets or sets the entity normal.

Gets or sets the distance between the center of the measured arc and the dimension line.

Gets the owner of the actual dxf object.

Gets or sets the arc radius.

Gets or sets the list of dxf objects that has been attached to this entity.

Gets or sets the arc start angle in degrees.

Gets or sets the style associated with the dimension.

Gets the dimension style overrides list.

Gets or sets if the text reference point has been set by the user. Set to false to reset the dimension text to its original position.

Gets or sets the text reference position, the middle point of dimension text in local coordinates.

Gets or sets layer transparency (default: ByLayer).

Gets the entity type.

Gets or sets the dimension text explicitly.

Gets or sets the entity extended data.